Shiftlock
When your vehicle is parked, the gear selector is locked in the P (Park) position. To release the selector from this position, the ignition must be in mode II (see page 82) or the engine must be running. Depress the brake pedal, press the button on the front side of the gear selector and move the selector from P (Park).
See also:
Vanity mirror lighting
Removing the mirror glass
1. Insert a screwdriver underneath the lower edge, in the center, turn and carefully
pry up the lug on the edge.
2. Carefully detach and lift out the entire mirror glas ...
Function
The system is activated automatically when the
vehicle is started. The indicator light in the button
in the center console illuminates.
• The front park assist system is active from
the time the ...
Introduction
The HomeLink1 Wireless Control System provides
a convenient way to replace up to three
hand-held radio-frequency (RF) transmitters
used to activate devices such as gate operators,
garage door op ...