See also:

Setting a speed
Once ACC has been put in standby mode, use the or buttons to store (set) the vehicle's current speed. This puts the system in active mode. The set speed, for example 55 mph, is shown in th ...

Brake lights and taillights
The brake lights and taillights are replaced from inside the cargo area. NOTE Before starting to replace a bulb, see page 322. 1. Open the panel. 2. Remove the bulb holder by turning it coun ...

Blower function to reduce battery drain
The climate system's blower functions normally while the engine is running. However, when the engine is switched off (even if the ignition is switched to positions I or II), the blower control w ...