See also:

Replacing the daytime running lightbulb (models with Active BendingLights only)
1. Remove the rubber cover over the bulb by pulling it off. 2. Turn the bulb holder counterclockwise and pull it out of the headlight housing. 3. Remove the connector from the bulb unit by pres ...

12-volt socket in the trunk
Fold down the cover to access the electrical socket. NOTE The 12-volt socket in the trunk provides electrical current even when the ignition is switched off. Using the socket while the engi ...

Mirrors with the water repellent glasscoating
• Do not apply wax, degreasing agents, etc to this glass. This could damage the coating. • Clean the glass surface with care to avoid scratching. NOTE The water repellent coating is subject to n ...