Equalizer
Sound levels for different frequencies can be adjusted separately using this feature. To do so:
1. Press OK/MENU to access Audio settings and select Equalizer
2. Turn TUNE to select one of the frequencies and press OK/MENU.
3. Turn TUNE to adjust the sound setting and confirm the change by pressing OK/ MENU. Do the same for the other frequencies.
4. When you have finished making your settings, press EXIT to save.
See also:
Brake fluid reservoir
The brake fluid should always be above the
MIN mark on the side of the reservoir. Check,
without removing the cap, that there is sufficient
fluid in the reservoir.
Fluid type: DOT 4+ boiling poi ...
Belt check
Check the belt regularly to make sure it is in
good condition and is clean. A worn or dirty belt
can cause poor cooling and low alternator output
as well as impair the operation of the power
steer ...
Driver Alert Control (DAC)– introduction
This function is intended to alert the driver if his/her driving becomes erratic,
such as if the driver is distracted or fatigued.
NOTE
The camera has certain limitations, see page 160.
A ...