See also:

License plate lighting
1. Remove the screws with a screwdriver. 2. Carefully detach the entire bulb housing and pull it out. 3. Replace the bulb. 4. Reinsert the entire bulb housing and tighten the screws. ...

Fault tracing and actions
If the message Radar blocked See manual is displayed, this means that the radar signals from the sensor have been obstructed and that a vehicle ahead cannot be detected. This, in turn, means th ...

Removing a paired device
1. In Bluetooth mode, press OK/MENU. 2. Turn TUNE to Remove Bluetooth device and press OK/MENU. 3. Select the device to be removed by turning TUNE and confirm by pressing OK/ MENU. > A que ...