See also:

Installing the ball holder
1. If necessary, remove the cotter pin from the locking bolt and slide the locking bolt out of the hitch assembly. 2. Slide the ball holder into the hitch assembly. 3. Align the hole in the ball ...

List of labels
Model plate. Vehicle Identification Number (VIN). Codes for color and upholstery, etc. The model plate is located on the rear side of the B-pillar (the pillar between the front and rear passe ...

Re-assembling the remote key
1. Press the remote key's cover into place. 2. Hold the remote key with the slot for the key blade up. 3. Carefully slide the key blade into its groove. 4. Gently press the key blade in the groov ...