See also:

Replacing the low beam bulb (halogenheadlights)
1. Remove the plastic cover over the bulb by turning it counterclockwise. 2. Pull the connector from the lamp housing. 3. Loosen the bulb's retaining spring by first moving it to the right and t ...

Stage 2: Checking inflation pressure
1. Connect the tire sealing system as described in stage 1. 2. Refer to the inflation pressure table in this chapter for the correct inflation pressure. If the tire needs to be inflated, start ...

Towing eyelet
Location of the towing eyelet Removing the front/rear covers ...