Engaging the cruise control function
Before a speed can be set, the cruise control system must be engaged (put in standby mode).
Press the symbol (1).
> The symbol illuminates and the
text
(---) mph (5) indicates that cruise control
is in standby mode.
NOTE
• Putting cruise control in standby mode
does not set a cruising speed.
• When cruise control is in standby mode,
the driver's seat belt must be fastened
before a cruising speed can be set.
See also:
PARK BRAKE Parking brake applied
This light will be on when the parking brake
(hand brake) is applied. The parking brake
pedal is located on the left side of the driver's
footwell, see page 79 for more information.
Canadian mode ...
Connecting a device to the A/V-AUX socket
The A/V-AUX socket is located under the center armrest in the tunnel console
1. Connect the device's video cable to the
yellow connector.
2. Connect the left audio cable to the white
connector ...
Supplemental Restraint System
Supplemental Restraint System (SRS)
SRS warning light
As an enhancement to the three-point seat
belts, your Volvo is equipped with a Supplemental
Restraint System (SRS). Volvo's SRS
consists of ...