Low beams

Low beams - High/low beam headlights - Lighting - Your driving environment - Volvo XC60 Owners Manual - Volvo XC60

When the engine is started, the low beams are activated automatically (daytime running lights) if the headlight control is in position 0 or Daytime running lights can be deactivated in.

Daytime running lights can be deactivated in the MY CAR menu system under Settings Car settings Car settings Light settings Light settings Daytime Daytime running lights.

However, please be aware that these lights may not be deactivated in Canada.

NOTE
• The use of daytime running lights is mandatory in Canada.
• Continuous high beams cannot be activated when the headlight switch is in position will. High beam flash will function in this position.

    See also:

    Guiding lines
    The lines on the screen are projected as if they were a path on the ground behind the vehicle and are affected by the way in which the steering wheel is turned. This enables the driver to se ...

    Standby mode due to action by the driver
    ACC is temporarily deactivated and put in standby mode: • when the brakes are applied • if the driver's seat belt is taken off • If the driver's door is opened • if the gear selector is moved to ...

    Driving Impressions
    Volvo's smallest wagon is just as refined and tightly built as the bigger V70, if a bit snug inside. Performance is a strong point with the turbocharged model, but the T5's ride can get rough on h ...