SURROUND MODE

Surround sound settings are used to balance sound levels throughout the vehicle. Surround settings for the various sound sources are made separately.
There are three settings for surround sound.
• PRO LOGIC II
• 3-CHANNEL
• OFF (2-channel stereo)
The
symbol in the display
indicates that
Dolby Surround Pro Logic II is activated.
• Dolby Surround Pro Logic II functions in
CD mode only.
• 2-channel stereo is recommended for
AM/FM radio broadcasts.
• Dolby Surround Pro Logic II is only available
on the highest level audio system –
Premium Sound.
Use the following instructions to select PRO LOGIC II, 3-CHANNEL, or to turn these functions off.
1. Select AUDIO SETTINGS in the menu and
press ENTER.
2. Select CD SURROUND and press
ENTER.
3. Select PRO LOGIC II, 3-CHANNEL, or
OFF and press ENTER.
4. The symbol
PL II is displayed
when
Pro Logic II is selected.
5. 3-CH is displayed when 3-channel stereo
is selected.
6. OFF indicates normal stereo mode.
Dolby noise reduction is manufactured under license from Dolby Laboratories Licensing Corporation.
"Dolby Surround Pro Logic II", and the double- D symbol are trademarks of Dolby Laboratories Licensing Corporation. Dolby Surround Pro Logic II is manufactured under licence from Dolby Laboratories Licensing Corporation.
See also:
Returning to mode I from mode II
With the remote key fully pressed into the ignition
slot, press START/STOP ENGINE briefly. ...
Messages
When a warning, information or indicator symbol comes on, a corresponding message
appears on the information display. An error message is stored in a memory list
until the fault is rectified.
P ...
Wiper blades
The windshield wiper blades are different
lengths. The blade on the driver’s side is longer
than the one on the passenger side.
Service position
Wiper blades in service position
The wiper bla ...
