Belt check

Check the belt regularly to make sure it is in good condition and is clean. A worn or dirty belt can cause poor cooling and low alternator output as well as impair the operation of the power steering and the air conditioning unit.
NOTE
The drive belt is equipped with a self-tensioning
mechanism and requires no adjustment
between changes.
WARNING
The engine must not be running when this
check is performed.
See also:
Brake fluid reservoir
The brake fluid should always be above the
MIN mark on the side of the reservoir. Check,
without removing the cap, that there is sufficient
fluid in the reservoir.
Fluid type: DOT 4+ boiling poi ...
Lane Departure Warning (LDW)– introduction
This function is designed to help reduce the
risk of accidents in situations where the vehicle
leaves its lane and there is a risk of driving off
the road or into the opposite lane. LDW consis ...
Unlocking
1. Insert the remote key into the ignition slot
as far as possible.
2. Press the START/STOP ENGINE button.
> A sound will be audible when the lock
releases.
Vehicles with keyless drive*
A r ...
