Turn signals
When turning
Move the lever as far up or down as possible (to position 2) to start the turn signals. The turn signals will be cancelled automatically by the movement of the steering wheel, or the lever can be returned to its initial position by hand.
When changing lanes
The driver can automatically flash the turn signals 3 times by:
• Moving the turn signal lever up or down to
position (1) and releasing it.
• Moving the lever up or down to position (2)
and immediately back to its original position.
NOTE
• This automatic flashing sequence can
be interrupted by immediately moving
the lever in the opposite direction.
• If the turn signal indicator flashes faster
than normal, check for a burned-out
turn signal bulb.
See also:
Keypads
Keypads in the steering wheel
1 - Cruise control, see page 153. Adaptive cruise control*, see page 155.
2 - Infotainment controls, see page 207. ...
INFO—displaying additional information
In certain cases, more information may be available (about a radio station, song,
artist, etc.) than is currently displayed on the screen. Press the INFO button to
display all of the available i ...
Auxiliary equipment
Auxiliary connector
1 AUX socket (3.5 mm)
2 Audio switch AUX/RSE
If the vehicle is equipped with Rear Seat Entertainment
(RSE), an audio switch is located in
the tunnel console for switching ...