See also:

Operation
Controls and display 1 - Resume previous settings, increase speed (each additional press increases speed by 2 - 1 mph (approximately 2 km/h). 3 - Standby mode on/off 4 - Set time interval 5 ...

Tilt position
Tilt position, raised at the rear edge 1 Open (raise the rear edge of the front glass section) by pressing the rear edge of the control upward. 2 Close by pulling the rear edge of the control ...

Engine oil
Although some oil consumption occurs during normal engine operation, more oil is consumed when the engine is new as the internal parts generate higher friction while wearing-in to each other. From ...