See also:

Turning ACC off completely
From standby mode, press once. From active mode, press twice. The set speed and time interval are then cleared from the system's memory and cannot be resumed by pressing . ...

Replacing the high beam bulb (halogenheadlights)
1. Remove the rubber cover by pulling it off. 2. Pull the connector from the lamp housing. 3. Loosen the bulb's retaining spring by first moving it to the right and then moving it out of the way ...

Introduction
The HomeLink1 Wireless Control System provides a convenient way to replace up to three hand-held radio-frequency (RF) transmitters used to activate devices such as gate operators, garage door op ...