Reverse ®)

The vehicle must be stationary when position R is selected.
See also:
Replacing the low beam bulb (halogenheadlights)
1. Remove the plastic cover over the bulb by
turning it counterclockwise.
2. Pull the connector from the lamp housing.
3. Loosen the bulb's retaining spring by first
moving it to the right and t ...
List of labels
Model plate. Vehicle Identification Number (VIN). Codes for color and upholstery,
etc. The model plate is located on the rear side of the B-pillar (the pillar
between the front and rear passe ...
Taking out the spare wheel
1. Open the floor hatch.
2. Undo the retaining bolt.
3. Lift out the foam block.
4. Lift out the spare wheel.
The other two blocks can remain in the spare
wheel well.
After use
The foam block ...
