Folding the front seat backrest


Folding the front seat backrest
The front passenger seat backrest can be folded to a horizontal position to make room for a long load. Fold the backrest as follows:
1 Move the seat as far back and down as possible.
2 Adjust the backrest to an upright position.
2 Lift the catches on the rear of the backrest.
3 Without releasing the catches, push the backrest forward.
Move the seat as far forward as possible so that the head restraint slides under the glove compartment.
WARNING
• When transporting long objects, cover
sharp edges on the load to help prevent
injury to occupants. Secure the load to
help prevent shifting during sudden
stops.
• When the seat's backrest is returned to
the upright position, push and pull it to
be sure that it is securely locked in this
position.
See also:
Connecting a device to the A/V-AUX socket
The A/V-AUX socket is located under the center armrest in the tunnel console
1. Connect the device's video cable to the
yellow connector.
2. Connect the left audio cable to the white
connector ...
Disconnecting the cell phone
The cell phone is automatically disconnected from the infotainment system if
it is moved out of range.
The cell phone can be manually disconnected from the hands-free system by pressing
and holdi ...
Introduction
Display when the radio is receiving an HD Radio broadcast
NOTE
HD radio volume may fade in and out at
times due to coverage limitations.
HD radio is a brand name registered by the
Ibiquity di ...
