Starting and stopping the engine
See page 112 for information on starting the engine and switching it off.
See also:
Touching up paintwork
Paint code on the model plate
Paint damage requires immediate attention to
avoid rusting. Make it a habit to check the finish
regularly, for instance washing the vehicle.
Touch-up if necessary ...
Rear fog light
1. Switch off the ignition.
2. Carefully insert a small screwdriver (see
illustration above).
3. Pry out the lamp housing.
4. Turn the bulb holder counterclockwise and
remove it.
5. Turn the b ...
Calibration
The compass may need to be calibrated if, for example, the vehicle is driven
into a new magnetic zone. The character C is shown in the mirror's display if calibration
is necessary.
1. Stop th ...