Keyless drive
See also:
Setting a speed
Once ACC has been put in standby mode, use the
or
buttons to store (set) the vehicle's
current speed. This puts the system in active mode. The set speed, for example 55
mph, is shown in th ...
Replacing the turn signal bulb
1. Turn the lamp holder approximately 1/4
turn counterclockwise and pull it out of the
headlight housing.
2. Press in the bulb slightly and pull it out of
the holder.
3. Align the guide lugs on ...
Introduction
All bulb specifications are listed on page 328.
The following bulbs should only be replaced by
a trained and qualified Volvo service technician:
• Dome lighting, reading lights
• Glove compartmen ...