Re-assembling the remote key
1. Press the remote key's cover into place.
2. Hold the remote key with the slot for the key blade up.
3. Carefully slide the key blade into its groove.
4. Gently press the key blade in the groove until it clicks into place.
Old batteries should be properly recycled.
See also:
Standby mode (temporary deactivation)
Press to temporarily deactivate
cruise control (put it in standby mode). The set speed, for example 55 mph, is then
shown in parentheses. The previously set speed and time interval are resumed by ...
BRAKE Brake circuit malfunction
The brake system is a hydraulic system consisting
of two master cylinders and two separate
brake circuits. If a problem should occur in
one of these circuits, it is still possible to stop
the vehi ...
Unbuckling the seat belt
To remove the seat belt, press the red section on the seat belt receptacle. Before
exiting the vehicle, check that the seat belt retracts fully after being unbuckled.
If necessary, guide the belt ...