Vanity mirror lights
1. Carefully insert a
screwdriver and pry out
the lens.
2. Pry out the bulb and replace it.
3. Carefully press the lower edge of lens onto
the four tabs and press the upper edge of
the lens into place.
See also:
Introduction
Collision Warning with Full Auto-brake and Pedestrian Detection is designed to
assist the driver if there is a risk of a collision with a pedestrian, a vehicle
ahead that is at a standstill or one ...
Mirrors with the water repellent glasscoating
• Do not apply wax, degreasing agents, etc
to this glass. This could damage the coating.
• Clean the glass surface with care to avoid
scratching.
NOTE
The water repellent coating is subject to
n ...
Impact protection
The two front airbags are 'intelligent' and deploy in two stages according to
the severity of the accident, alleviating the risk of facial injuries caused by
the occupants' faces impacting with th ...