Replacing the turn signal bulb
1. Turn the lamp holder approximately 1/4
turn counterclockwise and pull it out of the
headlight housing.
2. Press in the bulb slightly and pull it out of
the holder.
3. Align the guide lugs on the side of the base
of the new bulb in the grooves in the holder.
Press it in and turn it slightly clockwise.
4. Press the lamp holder into the place in the headlight housing and turn it approximately 1/4 turn clockwise.
See also:
Temperature control
The temperatures on the
driver and passenger sides
can be set separately. When
the vehicle is started, the
most recent setting is
resumed.
NOTE
Heating or cooling cannot be speeded up by ...
Operation
Steering wheel-mounted controls and display
1 Standby mode
2 Resume set speed
3 Deactivating
4 Activate/set speed
5 Set speed indicator (parentheses indicate standby mode) ...
Ignition mode functions
The various ignition modes are accessed with the remote key in the ignition slot1.
...