Tailgate wiper blade
To change a tailgate wiper blade:
1. Pull the wiper arm rearward, away from the
tailgate window.
2. Pull out the wiper blade as shown in the
illustration.
3. Press the new wiper blade into place.
Check that it is properly secured.
NOTE
Keeping the windshield/tailgate window
and wiper blades clean helps improve visibility
and prolongs the service life of the
wiper blades, see page 200 for washing
instructions.
See also:
Cleaning the brake discs
Coatings of dirt and water on the brake discs may result in delayed brake function.
This delay is minimized by cleaning the brake linings.
Cleaning the brake pads is advisable in wet weather, prior ...
Power windows
Driver's door control panel
1 - Switch for disengaging rear door power window buttons
2 - Rear door window controls
3 - Front door window controls.
WARNING
Always remove the ignitio ...
Replacing bulbs in the taillight cluster
1. Switch off all lights and turn ignition key to
position 0.
2. Fold down the lower section of the tailgate,
and fold up the rear section of the cargo
area floor.
3. If the vehicle is equipped ...