Stability system

See also:
Installation
1. Lower the battery into the battery box.
2. Move the battery inward and to the side
until it reaches the rear edge of the box.
3. Tighten the clamp that secures the battery.
4. Connect the ve ...
Scan
This function plays the first ten seconds of each track/audio file. To start
scanning:
1. Press OK/MENU.
2. Turn TUNE to Scan.
> The first ten seconds of each track/ audio file will be played. ...
Maintenance
Use a screw driver to open the caps or cover and a flashlight to inspect
the level.
If necessary, add distilled water. The level should never be above the indicator.
The fluid level should b ...
