Folding the backrests in the front seat
The front passenger seat backrest can be folded to a horizontal position to make room for a long load. Fold the backrest as follows:
1. Move the seat as far back as possible.
2. Adjust the backrest to the upright position.
3. Lift the catches on the rear of the backrest.
4. Without releasing the catches, push the
backrest forward.
5. Move the seat as far forward as possible
so that the head restraint slides under the
glove compartment.
WARNING
• When transporting long objects, cover
sharp edges on the load to help prevent
injury to occupants. Secure the load to
help prevent shifting during sudden
stops.
• When the seat's backrest is returned to
the upright position, push and pull it to
be sure that it is securely locked in this
position.
See also:
Power windows
The power windows are controlled by buttons
in the arm rests. The ignition switch must be
ON1 (ignition key in position I, II or the engine
running) for the electrically operated windows
to functi ...
Accessing the tire sealing system
The tire sealing system is stowed under the
floor of the cargo area. To access it:
1. Lift the floor hatch in the cargo area.
2. Lift out the tire sealing system.
NOTE
• The tire sealing system ...
Activating/deactivating TPMS (Canadian models only)
1. Switch off the engine.
2. Put the ignition in mode I or II (see page
82 for additional information).
3. Press the MY CAR key in the center console
control panel and select Settings
Car se ...