Settings

Press OK/MENU when a normal camera view is displayed and make the desired settings. Parking camera settings
- Mark Park Assist lines to display the sidelines while backing up.
- Mark Distance information to display the intersecting lines while backing up. Activating the system
- Mark Automatic to activate PAC each time reverse gear is selected.
- Mark Off to turn off PAC completely.
See also:
Reinserting the headlight housing
When reinserting the housing, be sure that the
long locking pin (to the left in the illustration) is
securely in place in both of its retaining clamps.
1. Plug in the connector until it clicks ...
Operation
Chassis settings
Use the buttons in the center console to change setting. The setting in use when
the engine is switched off is activated the next time the engine is started. ...
Low beam, Halogen
1. Remove the headlight housing from the vehicle (see page 306).
2. Remove the cover over the bulbs (see page 308).
3. Unplug the connector from the bulb.
4. Remove the bulb by pulling it straigh ...
