Fault tracing and actions

If the message Radar blocked See manual is displayed, this means that the radar signals from the sensor have been obstructed and that a vehicle ahead cannot be detected.
This, in turn, means that the functions of the ACC, Distance Alert, and Collision Warning System with Auto-brake and Pedestrian Detection will not function.
The table lists possible causes for this message being displayed, and suitable actions.


See also:
Selecting a channel
There are three ways of tuning in a channel:
Using the left and right arrow keys to go to the next channel. Skipped channels
(see page 220) will be excluded.
By turning the TUNE control and s ...
Driving through water
The vehicle can be driven through water up to a depth of approximately 10
in. (25 cm), at a maximum speed of 6 mph (10 km/h).
Take particular care when driving through flowing water.
Clean t ...
Operation
Controls and display
1 - Resume previous settings, increase speed (each additional press increases
speed by 2 - 1 mph (approximately 2 km/h). 3 - Standby mode on/off 4 - Set time
interval 5 ...
