Heated rear seats


Heat control for the outboard seating positions is done in the same way as for the front seats.
See also:
Using the information button
1. Press the information button
2. All of the indicator lights will flash sequentially for approximately 7 seconds
to indicate that the PCC is receiving information from the vehicle. If any of the ...
12-volt sockets
These 12 volt sockets can be used to plug in
certain accessories such as cellular telephones,
etc.
The ignition key must be in at least position I
for the sockets in the front seat and the optio ...
High beam, Halogen
1. Remove the headlight housing from the
vehicle (see page 322).
2. Remove the cover over the bulbs (see
page 323).
3. Remove the bulb by turning it counterclockwise
and pulling it straight ...
