See also:

Operation
Controls and display 1 Resume previous settings, increase speed (each additional press increases speed by 1 mph (approximately 2 km/h). 2 Standby mode on/off 3 Set time interval 4 Put in activ ...

Replacing the low beam bulb (halogenheadlights)
1. Remove the plastic cover over the bulb by turning it counterclockwise. 2. Pull the connector from the lamp housing. 3. Loosen the bulb's retaining spring by first moving it to the right and t ...

Introduction
The park assist system is designed to assist you when driving into parking spaces, garages, etc. It utilizes ultrasound sensors in the front bumper and rear bumper(s) to measure the distance t ...