Brake lights and taillights
The brake lights and taillights are replaced from inside the cargo area.
NOTE
Before starting to replace a bulb, see
page 322.
1. Open the panel.
2. Remove the bulb holder by turning it counterclockwise.
3. Remove the burned out bulb by pressing it in and turning it counterclockwise.
4. Insert a new bulb, press it in and turn it clockwise.
5. Reinsert the bulb holder and turn it clockwise.
See also:
Trailer Stability Assist – TSA
Trailer Stability Assist helps stabilize a vehicle
that is towing a trailer when the vehicle and
trailer have begun to sway. See page 279 for
more information.
This system is automatically deac ...
Side impact protection airbags
Side impact airbags – front seats only
Location of the side impact (
SIPS) airbag
As an enhancement to the structural side
impact protection built into your vehicle, the
vehicle is also equippe ...
Use
• Pull the cover over the cargo and hook it
into the holes in the rear cargo area pillars.
• To retract (roll up) the cover, release it from
the holes and guide it toward the rear seat
backrest ...