See also:

Cargo compartment light
1. Carefully insert a screwdriver and pry out the lens. 2. Pry out the bulb and replace it. 3. Press the lens back into place. ...

Tilt position
Tilt position, raised at the rear edge 1 Open (raise the rear edge of the front glass section) by pressing the rear edge of the control upward. 2 Close by pulling the rear edge of the control ...

Installing the wheel
1. Clean the contact surfaces on the wheel and hub. 2. Lift the wheel and place it on the hub. 3. Install the wheel bolts and tighten handtight. Using the lug wrench, tighten crosswise until al ...