When does BLIS function
The system functions when your vehicle is moving at speeds above 6 mph (10 km/h).
When you pass another vehicle:
The system reacts when you pass another vehicle at a speed of up to 6 mph (10 km/h) faster than that vehicle.
When you are passed by another vehicle:
The system reacts if your vehicle is passed by another vehicle at a speed of up to 43 mph (70 km/h) faster than your vehicle.
WARNING
• BLIS does not function in sharp curves.
• BLIS does not function when your vehicle
is backing up.
• If you are towing a wide trailer, this may
prevent the BLIS cameras from detecting
other vehicles in adjacent lanes.
See also:
Polishing and waxing
Normally, polishing is not required during the first year after delivery,
however, waxing may be beneficial.
Before applying polish or wax the vehicle must be washed and dried. Tar
spots ca ...
Taillight housing
The bulbs in the taillight cluster are replaced from inside the trunk (not the
LED functions).
NOTE
Before starting to replace a bulb, see page 306.
1. Remove the covers in the left/right ...
Replacing the daytime running lightbulb (models with Active BendingLights only)
1. Remove the rubber cover over the bulb by
pulling it off.
2. Turn the bulb holder counterclockwise and
pull it out of the headlight housing.
3. Remove the connector from the bulb unit
by pres ...