Keylock
When you switch off the ignition, the gear selector must be in the P (Park) position before the key can be removed from the ignition switch.
See also:
Tilt position
Tilt position, raised at the rear edge
1 Open (raise the rear edge of the front glass
section) by pressing the rear edge of the
control upward.
2 Close by pulling the rear edge of the control ...
Faults in the system
If the information symbol illuminates and Park
assist syst Service required is shown on the
information display, this indicates that the system
is not functioning properly and has been
disenga ...
Service position
Wiper blades in service position
The wiper blades must be in the vertical (service) position for replacement,
washing or to lift them away from the windshield when e.g., removing ice or snow.
T ...