See also:

Removing the cover to access the bulbs
NOTE Before starting to replace a bulb, see page 322. 1. Open the retaining clamps by pressing them to the sides. 2. Pull the cover straight out. Reinstall the cover in the reverse order. ...

Putting ACC in standby mode
Before ACC can be used to regulate speed and/or the distance to a vehicle ahead, it must first be put in standby mode. To do so: Press . The symbol appears in the display and parentheses ( ...

On/Off button
To activate the system: 1. Turn the ignition key to position I. NOTE If you switch off the ignition while the audio system is on, the system will be on when the ignition is switched on again. ...