Key memory: door mirrors and driver's seat

Key memory: door mirrors and driver's seat  - Introduction - Remote key and key blade - Locks and alarm - Volvo XC60 Owners Manual - Volvo XC60

The position of the side door mirrors and power driver's seat are stored in the remote keys when the vehicle is locked. The next time the driver's door is unlocked with the same remote key and the door is opened within 2 minutes, the power driver's seat and side door mirrors will automatically move to the position that they were in when the doors were most recently locked with the same remote key. See page 85 for more information.

This feature can be activated or deactivated in the vehicle's menu by pressing MY CAR and going into Settings Car settings The position of the side door mirrors and power The position of the side door mirrors and power driver's seat are stored in the remote keys when the vehicle is locked. The next time the driver's door is unlocked with the same remote key and the door is opened within 2 minutes, the power driver's seat and side door mirrors will automatically move to the position that they were in when the doors were most recently locked with the same remote key. See page 85 for more information.

This feature can be activated or deactivated in the vehicle's menu by pressing MY CAR and going into Settings Car settings Car key memory. See page 133 for a description of the menu system.

See also page 63 for information regarding vehicles with the optional keyless drive.Car key memory. See page 133 for a description of the menu system.

See also page 63 for information regarding vehicles with the optional keyless drive.

    See also:

    Setting a time interval
    The set time interval to vehicles ahead can be increased by pressing and decreased by pressing . The current time interval is shown briefly in the display following adjustment. Different ...

    Front footwell lighting
    The front footwell lights are located under the dashboard on the driver's and passenger's sides. To replace a bulb: 1. Carefully insert a screwdriver and pry out the lens. 2. Replace the d ...

    Programming HomeLink
    NOTE Some vehicles may require the ignition switch to be turned on or to the second (“accessories”) position for programming and/or operation of HomeLink. It is also recommended that a new batter ...