High-pressure headlight washing
High-pressure headlight washing consumes a large quantity of washer fluid. To save fluid, the headlights are washed using two alternatives:
• Low/high beam headlights on. The headlights will be washed the first time the windshield is washed. Thereafter, the headlights will only be washed once for every five times the windshield is washed within a 10-minute period.
• Parking lights on. Optional Active Bending Lights will be washed once for every five times the windshield is washed. Normal halogen headlights will not be washed.
CAUTION Use ample washer fluid when washing the windshield. The windshield should be thoroughly wet when the wipers are in operation.
See also:
Replacing the high beam bulb (halogenheadlights)
1. Remove the rubber cover by pulling it off.
2. Pull the connector from the lamp housing.
3. Loosen the bulb's retaining spring by first
moving it to the right and then moving it out
of the way ...
Function
Location of the laser sensor in the windshield
City Safety™ monitors traffic ahead of you
using a laser sensor mounted in the upper section
of the windshield. If a collision is imminent,
City ...
Driving after a collision
If the vehicle has been involved in a collision,
the text Safety mode See manual may
appear in the information display. This indicates
that the vehicle's functionality has been
reduced.
NOTE
...