Keyless drive remote key and driver's seat/door mirror memory

• When you leave the vehicle with a PCC in your possession and lock any door, the position of the driver's seat and door mirrors will be stored in the seat's memory.
• The next time a door is opened by a person with the same PCC in his/her possession, the driver's seat and door mirrors will automatically move to the position that they were in when the door was most recently locked.
NOTE
If several people carrying PCCs approach
the vehicle at the same time, the driver's
seat and door mirrors will assume the positions
they were in for the person who opens
the driver's door.
See also page 85 for information on adjusting and storing the seat's position in the seat memory.
See also:
Programming HomeLink
NOTE
Some vehicles may require the ignition
switch to be turned on or to the second
(“accessories”) position for programming
and/or operation of HomeLink. It is also recommended
that a new ba ...
Power moonroof
To operate the moonroof, turn the ignition key
to position I or II, or start the engine. The moonroof
can be operated in two ways:
A Tilt position
B Sliding moonroof
Tilt position
Open: With ...
Temporary shut-off of the air conditioning
The air conditioning is momentarily disengaged
during full-throttle acceleration or when
driving uphill with a trailer. This may result in a
temporary increase in cabin temperature. ...
