Sound settings

Sound settings - Bluetooth® hands-free connection - Audio - Volvo XC90 Owners Manual - Volvo XC90

Call volume

Call volume can be adjusted while a call is in progress using the buttons in the steering wheel keypad.

Audio system volume

When PHONE is displayed, volume for the audio system can be adjusted in the normal way with the audio system's VOLUME control.

In order to adjust volume during a phone call, the audio system must be switched to one of the other modes (FM, CD, etc).

Audio system sound can be automatically muted when a phone call is received in

Phone Menu… Sounds and volume… Mute radio and Phone settings…Sounds and volume… Mute radio and Sounds and volume… adjust the volume with the keys on Mute radio and adjust the volume with the the keys on the center console.

Ringing volume

Go to Phone Menu… settings… Sounds and volume…  Phone settings…Ring volume Sounds and volume…Ring volume  Ring volume

and adjust the volume with the keys on keys on the center console.

Ringing tones

The hands-free system’s integrated ringing tones can be selected in Phone Menu…Phone settings… Sounds and volume… Phone settings… Ring signals… Ring signal 1, etc. Sounds and volume…Ring signals… Ring signal 1, etc. Ring signals… NOTE Ring signal 1, etc.

NOTE
The connected cell phone’s ring tone may not be switched off when one of the handsfree system's ringing tones is used.

If you prefer to use the connected cell phone’s ring tone1, go to Phone Menu… settings… Sounds and volume… Phone settings… Ring Sounds and volume… signals… Use cell phone signal Ring signals… More information about registeringand connecting cell phones Use cell phone signal

    See also:

    On and off
    To switch Collision Warning on or off, press MY CAR on the center console control panel and go to Settings Car settings Driver support systems Collision Warning. If Collision Warning is on, the sy ...

    Driving distance on current fuel reserve
    This function shows the approximate distance that can be driven on the fuel remaining in the tank. The calculation is based on average fuel consumption during the last 20 miles (30 km) of driv ...

    License plate lighting
    1. Remove the screws with a screwdriver. 2. Carefully detach the entire bulb housing and pull it out. 3. Replace the bulb. 4. Reinsert the entire bulb housing and tighten the screws. ...