List of labels

List of labels - Label information' - Specifications - Volvo S60 Owners Manual - Volvo S60

  1. Model plate. Vehicle Identification Number (VIN). Codes for color and upholstery, etc. The model plate is located on the rear side of the B-pillar (the pillar between the front and rear passenger doors) and the rear passenger's door must be open in order to see it.
  2. Federal Motor Vehicle Safety Standards (FMVSS) specifications (USA) and Ministry of Transport (CMVSS) standards (Canada). Your Volvo is designed to meet all applicable safety standards, as evidenced by the certification label on the driver's side B-pillar (the structural member at the side of the vehicle, at the rear of the driver's door opening). For further information regarding these regulations, please consult your Volvo retailer.
  3. Tire inflation pressures. This label indicates the correct inflation pressures for the tires that were on the vehicle when it left the factory. Canadian models have the upper decal; U.S. models have the lower one.
  4. Vehicle Identification Number (VIN). The VIN plate is located on the top left surface of the dashboard. The Vehicle Identification Number (VIN) should always be quoted in all correspondence concerning your vehicle with the retailer and when ordering parts.
  5. Vehicle Emission Control Information. Your Volvo is designed to meet all applicable emission standards, as evidenced by the certification label on the underside of the hood. For further information regarding these regulations, please consult your Volvo retailer.
    See also:

    Minor scratches on the surface
    If the stone chip has not penetrated down to the metal and an undamaged layer of paint remains, the touch-up paint can be applied as soon as the spot has been cleaned. ...

    All Wheel Drive
    All Wheel Drive (AWD) – general information Your Volvo can be equipped with an electronically controlled All Wheel Drive system, which means that power is distributed automatically between the fr ...

    High/low beam headlights
    Continuous high beams 1. Turn the ignition key to position II. 2. With the light switch in position , (see page 67) pull the turn signal lever toward the steering wheel to toggle between high a ...