See also:

Fault tracing and actions
If the message Radar blocked See manual is displayed, this means that the radar signals from the sensor have been obstructed and that a vehicle ahead cannot be detected. This, in turn, means that ...

Replacing the low beam bulb (halogenheadlights)
1. Remove the plastic cover over the bulb by turning it counterclockwise. 2. Pull the connector from the lamp housing. 3. Loosen the bulb's retaining spring by first moving it to the right and t ...

Setting a speed
Once ACC has been put in standby mode, use the or buttons to store (set) the vehicle's current speed. This puts the system in active mode. The set speed, for example 55 mph, is shown in th ...