See also:

Setting a speed
Once ACC has been put in standby mode, use the or buttons to store (set) the vehicle's current speed. This puts the system in active mode. The set speed, for example 55 mph, is shown in th ...

Changing a wheel
WARNING The undersides of accessory running boards are not intended for attaching the jack. 1. Park the vehicle on a firm, level, non-slippery surface. 2. Engage the parking brake and put the ...

Brake pad inspection
On vehicles equipped with a jack*, the condition of the brake pads can be checked by raising the vehicle (see page 290 for information about using the jack and removing a wheel) and performing a v ...