Limitations
In certain situations, the BLIS indicator light(s) may illuminate even when there are no other vehicles in the area monitored by the system.
NOTE
If the BLIS indicator lights illuminate occasionally even when there are no other vehicles in the blind area, this does not indicate a fault in the system.
In the event of a fault, Blind spot syst. Service required will be displayed.
The following are several examples of situations in which the BLIS indicator light(s) may illuminate even when there are no other vehicles in the area monitored by the system.
Light reflected from a wet road surface
The vehicle's own shadow against a large, light, smooth surface such as barriers between lanes on a highway
Sunlight directly in the camera when the sun is low on the horizon
See also:
Storing stations
To store a selected station under one of the
station setting buttons 0 – 9 (2):
1. Set the desired station.
2. Press the button under which the station is
to be stored and keep it depressed. The
...
Replacing bulbs in the taillight cluster
1. Switch off all lights and turn ignition key to
position 0.
2. Fold down the lower section of the tailgate,
and fold up the rear section of the cargo
area floor.
3. If the vehicle is equipped ...
Maintenance
Use a screw driver to open the caps or cover and a flashlight to inspect
the level.
If necessary, add distilled water. The level should never be above the indicator.
The fluid level should b ...