Listening to the radio
You can also listen to the infotainment system's radio through the RSE system.
1. Switch on the cordless headphones, select CH.A for the left screen or CH.B for the right screen.
2. Point the remote control toward a screen's
IR transceiver and press one or
more
times to come to the desired source (AM,
FM1, Sirius1*, etc.), release the button
and wait several seconds for your selection
to be accepted.
3. Select a station using one of the preset
buttons (0 - 9) on the remote control or
press to search for the next/
previous available station.
See page 214 for more information about the radio.
See also:
Situations where ACC may not function optimally
WARNING
• The radar sensor has a limited field of
vision. In some situations it may detect
a vehicle later than expected or not
detect other vehicles at all.
• If ACC is not functioning proper ...
Rear park assist
The distance monitored behind the vehicle is
approximately 5 ft (1.5 m). The audible signal
comes from the rear speakers.
The system must be deactivated when towing
a trailer, carrying bicycl ...
Introduction
The HomeLink1 Wireless Control System provides a convenient way to replace up
to three hand-held radio-frequency (RF) transmitters used to activate devices such
as gate operators, garage door op ...