Getting started
Use the controls on the steering wheel keypad and in the center console to access, navigate and make selections in the hands-free system’s menus.
See also:
Changing coolant
Normally, the coolant does not need to be
changed. If the system must be drained, consult
a trained and qualified Volvo service technician.
Do not top off with water only. This reduces the
rust- ...
Brake pad inspection
On vehicles equipped with a jack, the condition
of the brake pads can be checked by raising
the vehicle (see page 190 for information
about using the jack and removing a wheel)
and performing a vi ...
Setting a speed
Once ACC has been put in standby mode, use
the or
buttons to store (set) the vehicle's
current speed. This puts the system in active
mode. The set speed, for example 55 mph, is
shown in th ...