See also:

Detachable trailer hitch (accessory)
A - Ball holder B - Locking bolt C - Cotter pin D - Hitch assembly E - Safety wire attachment Installing the ball holder 1. If necessary, remove the cotter pin from the locking bolt and slid ...

Replacing the turn signal bulb
1. Turn the lamp holder approximately 1/4 turn counterclockwise and pull it out of the headlight housing. 2. Press in the bulb slightly and pull it out of the holder. 3. Align the guide lugs on ...

Fuses in the passenger compartment on the edge of the dashboard
The decal shows the positions and amperage of the fu Fuses are located inside the access panel on the edge of the dashboard, on the driver's side. There are also a number of spare fuses. When ...