Activating/deactivating warning signals

Activating/deactivating warning signals - Operation - Collision warning with Full Auto-brake and Pedestrian Detection - Comfort and driving pleasure - Volvo XC60 Owners Manual - Volvo XC60

The collision warning system’s visual signals are activated automatically when the engine is started if the collision warning system is switched on.

The audible warning signal can be activated/ deactivated by pressing MY CAR on the center console control panel and going to Settings Car settings Car settings Driver support systems Driver support systems Warning sound if risk of collision. Warning sound if risk of collision.

    See also:

    Exterior
    For 2008, the nose and tail are modified, and though Volvo says it has changed the headlights and taillights, it seems limited to the elements within, such as taillamp LEDs and lens colors, and no ...

    Location
    The vehicle is equipped with a tire sealing system that enables you to temporarily seal a hole in the tread surface and re-inflate a flat tire, or to adjust a tire’s inflation pressure. The sys ...

    PARK BRAKE Parking brake applied
    This light will be on when the parking brake (hand brake) is applied. The parking brake pedal is located on the left side of the driver's footwell, see page 79 for more information. Canadian mode ...