See also:

Replacing the high beam bulb (halogenheadlights)
1. Remove the rubber cover by pulling it off. 2. Pull the connector from the lamp housing. 3. Loosen the bulb's retaining spring by first moving it to the right and then moving it out of the way ...

Cleaning the sensors
Location of the front sensors Location of the rear sensors The sensors must be cleaned regularly to ensure that they work properly. Clean them with water and a suitable car washing detergent. ...

Conserving electrical current
Keep the following in mind to help minimize battery drain: • When the engine is not running, avoid using ignition mode II. Many electrical systems (the audio system, the optional navigation s ...