See also:

Brake pad inspection
On vehicles equipped with a jack*, the condition of the brake pads can be checked by raising the vehicle (see page 306 for information about using the jack and removing a wheel) and performing ...

Changing
WARNING Connect and disconnect the positive and negative cables in the correct sequence. Removal Switch off the ignition, remove the remote key from the ignition slot and wait at least 5 ...

Installation
1. Lower the battery into the battery box. 2. Move the battery inward and to the side until it reaches the rear edge of the box. 3. Tighten the clamp that secures the battery. 4. Connect the ve ...