Inserting the remote key

Inserting the remote key - Inserting and removing the remote key - Ignition modes - Your driving environment - Volvo XC60 Owners Manual - Volvo XC60

Holding the end of the remote key with the base of the key blade, insert the remote key into the ignition slot as shown in the illustration and press it in as far as possible (past the detent).

CAUTION Foreign objects in the ignition slot can impair function or cause damage.

    See also:

    Audible/visual alarm signal
    • An audible alarm signal is given by a battery powered siren. The alarm cycle lasts for 30 seconds. • The visual alarm signal is given by flashing all turn signals for approximately 5 minutes ...

    Shiftlock
    When your vehicle is parked, the gear selector is locked in the P (Park) position. To release the selector from this position, the ignition must be in mode II (see page 82) or the engine must ...

    Operation
    Chassis settings Use the buttons in the center console to change setting. The setting in use when the engine is switched off is activated the next time the engine is started. ...