Opening the remote key/PCC
1 1 Slide the spring loaded catch to the side.
2 Pull the key blade straight out of the remote key.
2 3 Insert a small screwdriver in the hole behind the spring loaded catch and carefully pry up the cover.
NOTE
Turn the remote key with the buttons
upward so that the batteries do not fall out
when the cover is removed.
See also:
Introduction
Your vehicle is equipped with tires according
to the vehicle's tire information placard on the
B-pillar (the structural member at the side of
the vehicle, at the rear of the driver's door
open ...
Power brakes function only when the engine is running
The power brakes utilize vacuum pressure which is only created when the engine
is running. Never let the vehicle roll to a stop with the engine switched off.
If the power brakes are not working, co ...
Changing a wheel
WARNING
The undersides of accessory running
boards are not intended for attaching the
jack.
1. Park the vehicle on a firm, level, non-slippery
surface.
2. Engage the parking brake and put the ...