See also:

Setting a speed
Once ACC has been put in standby mode, use the or buttons to store (set) the vehicle's current speed. This puts the system in active mode. The set speed, for example 55 mph, is shown in th ...

Brake fluid
Location of the brake fluid reservoir Checking the level The fluid reservoir is concealed under the round cover at the rear of the engine compartment. The round cover must be removed first befor ...

Brake pad inspection
On vehicles equipped with a jack*, the condition of the brake pads can be checked by raising the vehicle (see page 290 for information about using the jack and removing a wheel) and performing a v ...